Tripod – Aluminium Telescopic 2-Way with 3D Safety Adapter

$589.50

A tripod – flexible as never before: Raise your scanner upward or wind it down. The tripod allows not only scanning to a height of 4.00m, but also overhead scanning of shafts, etc.

SKU: 30103391 Category: Tag:

Description

A tripod?- flexible as never before: Raise your scanner into the upward or wind it down. The tripod allows not only scanning in a height of 4.00m (157.5 in), but also overhead scanning of shafts, for instance.The main rod has a support plate with a 5/8 inch connection. Depending on the measuring task, the support plate can be connected upright or head first. Then, the 4 provided extension tubes are inserted at the further end and secured. Thus, you can crank your scanner upwards or downwards on and on.The 3D safety adapter is applied for overhead applications. With this product, you can easily and safely scan overhead. The special adapter allows an easy assembly and safe support. The best protection of your valuable measuring instruments.Designated use:scanner usable over several heights?- without assembly, disassembly and modification
enlargement of the possible scanner positions
overhead scanningProduct characteristics?- 2-way telescope tripod:Tripod: 5/8 inch connection
Indirect crank drive with enhanced gear unit
The crank drive can be operated by means of a crank or a screwdriver.
Anti-twist geared column
Additional leg braces for more stability
Solid and quick locking mechanism
Spirit level
Set of shoes for tripod can be used on various surfaces
Minimum effective depth: approx. -4.50m below the earth’s surface
Maximum useful height: approx. 4.00m
Transport length: approx. 1.28m
Weight: approx. 10kg
Flat support plate with ? 110mm
Single telescope
Telescope lift: 818mm
During long-term usage, the scanner’s weight should not be higher than 20kg.
4 extension tubes (each 1m) in a robust transport case included
Suited for all scanners with 5/8″ connectionProduct characteristics – 3D safety adapter:One part of the 3D safety adapter is screwed on the original base plate of the scanner.
The other part of the adapter is screwed on the tripod with a 5/8 inch connection.
The part of the adapter and the scanner can easily be inserted in the correspondent part fixed at the tripod. Then, it can be secured by means of a safety pin.
Weight: 200g
Dimensions: 100mm x 105mm x 100mmCompatible laser scanners:FARO Focus3D und Focus3D X 330,?Trimble TX5
Z+F IMAGER 5006
Leica HDS 6000

Reviews

There are no reviews yet.

Be the first to review “Tripod – Aluminium Telescopic 2-Way with 3D Safety Adapter”

Your email address will not be published. Required fields are marked *