Tripod – Aluminium Telescopic 2-Way

$479.50

A tripod – flexible as never before: Raise your scanner upward or wind it down. The tripod allows not only scanning to a height of 4.00m, but also overhead scanning of shafts, etc.

SKU: 030-10321 Category: Tag:

Description

A tripod?- flexible as never before: Raise your scanner into the upward or wind it down. The tripod allows not only scanning in a height of 4.00m (157.5 in), but also overhead scanning of shafts, for instance.
The main rod has a support plate with a 5/8 inch connection. Depending on the measuring task, the support plate can be connected upright or head first. Then, the 4 provided extension tubes are inserted at the further end and secured. Thus, you can crank your scanner upwards or downwards on and on.
The 3/8 inch adapter included in the delivery allows using the tripod with FARO Focus3D, Focus3D X 330 and Trimble TX5.
Designated use:

Scanner usable over several heights?- without assembly, disassembly and modification
Enlargement of the possible scanner positions
Overhead scanning

Product characteristics?- 2-way telescope tripod:

Tripod: 5/8 inch connection; adapter for 3/8 inch connection is included in the delivery
Indirect crank drive with enhanced gear unit
The crank drive can be operated by means of a crank or a screwdriver.
Anti-twist geared column
Additional leg braces for more stability
Solid and quick locking mechanism
Spirit level
Set of shoes for tripod can be used on various surfaces
Minimum effective depth: approx. -4.50m below the earth’s surface
Maximum useful height: approx. 4.00m
Transport length: approx. 1.28m
Weight: approx. 10kg
Flat support plate with ? 110mm
Single telescope
Telescope lift: 818mm
During long-term usage, the scanner’s weight should not be higher than 20kg.
4 extension tubes (each 1m) in a robust transport case included
Suited for all scanners with 5/8″ and 3/8″ connection

A tripod?- flexible as never before: Raise your scanner into the upward or wind it down. The tripod allows not only scanning in a height of 4.00m (157.5 in), but also overhead scanning of shafts, for instance.

The main rod has a support plate with a 5/8 inch connection. Depending on the measuring task, the support plate can be connected upright or head first. Then, the 4 provided extension tubes are inserted at the further end and secured. Thus, you can crank your scanner upwards or downwards on and on.

The 3/8 inch adapter included in the delivery allows using the tripod with FARO Focus3D, Focus3D X 330 and Trimble TX5.

Designated use:

Scanner usable over several heights?- without assembly, disassembly and modification
Enlargement of the possible scanner positions
Overhead scanning

Product characteristics?- 2-way telescope tripod:

Tripod: 5/8 inch connection; adapter for 3/8 inch connection is included in the delivery
Indirect crank drive with enhanced gear unit
The crank drive can be operated by means of a crank or a screwdriver.
Anti-twist geared column
Additional leg braces for more stability
Solid and quick locking mechanism
Spirit level
Set of shoes for tripod can be used on various surfaces
Minimum effective depth: approx. -4.50m below the earth’s surface
Maximum useful height: approx. 4.00m
Transport length: approx. 1.28m
Weight: approx. 10kg
Flat support plate with ? 110mm
Single telescope
Telescope lift: 818mm
During long-term usage, the scanner’s weight should not be higher than 20kg.
4 extension tubes (each 1m) in a robust transport case included
Suited for all scanners with 5/8″ and 3/8″ connection

Reviews

There are no reviews yet.

Be the first to review “Tripod – Aluminium Telescopic 2-Way”

Your email address will not be published. Required fields are marked *